|
You are here: Home > New Equipment > Concrete & Masonry > Curb Machines |
Curb Machine, Landscape (Miller MC350)
The MC350 Landscape Curbilder‘ is the newest curber in Miller Spreader’s Curbilder‘ family of curbing machines. Like the MC250, the MC350 Landscape machine is designed to place decorative landscape curbing and smaller commercial curbing.
A 6” reciprocating plunger powered by a 3HP Honda engine pushes the curb mix from the hopper into the curb form. The plunger assembly components are machined to tight and exacting tolerances for years of trouble free operation. Since the hopper is open on the bottom, dips and valleys in the base are filled in so site preparation doesn’t need to be as accurate as with an auger machine.
Curb forms are reversible within the plunger housing so either left or right hand curbing can be placed with the same form. The design of the MC350 allows for “zero” clearance on the right side of the machine when placing curb. A drop pointer is standard to ensure straight and level curbing.
A level indicator, emergency stop switch, hour meter, and operator’s manual tube are located on the console. The spring tensioned height adjustment handles won’t vibrate so the height adjustment stays constant. Proper tensioning of the drive belt is a snap with the hinged engine mount and adjusting bolt.
As with all Miller products, the MC350 Landscape Curbilder‘ is backed by Miller’s exclusive 6-year warranty.
Standard Features
1, Console
6" housing assembly with ram
Console-mounted combination hour meter, tachometer and service meter
Engine guard with lifting bail
Indicator level
Removeable transport wheel and lifting handle
Adjustable steering handle
.63 cu ft hopper with anti-bridging design
3hp Honda engine
Reversible curbforms and "Zero" clearance to obstructions (with pointer removed)
Belt tensioning mechanism
Specifications
Engine 3HP Honda
Wheels (3) 9" x 3-1/2" pneumatic tires
Drive Automatic centrifugal clutch to enclosed gear reducer, final drive chain and sprocket
Hopper Capacity 0.63 cubic feet
Steering Tie rod; multi-position adjustable steering handle
Height 36-1/4" (Operating height)
Length 45" with form
Width 19-1/2"
Weight 190 lb
Engine 3HP Honda, recoil start
Drive Reciprocating Arm
Wheels (3) 6" x 2"pneumatic
Weight 190 lb.
MSRP $3,310 for the machine
$215 for any standard form
$35 for each 1/2 trowel (some forms require two trowels)
$270 engineering charge for design of a new form
Prices subject to change. Please call factory to confirm pricing.
|
|
|
