Forklift, Telescopic, 54' 10,000lbs. (Sky Track 10054)
Specs (Specifications may change due to continuous product development)
| Model 10054 | | Rated Capacity @ 24 in. (610 mm) Load Center | 10,000 lb (4,536 kg) | | Maximum Lift Height | 53 ft 2 in. (16.21 m) | | Capacity @ Maximum Lift Height | 4,000 lb (1,814 kg) | | Maximum Reach | *26 ft (7.92 m) / **39 ft (11.27 m) | | Capacity @ Maximum Reach | *1,400 lb (635 kg) / **3,000 lb (1,361 kg) | | Approximate Operating Weight | 27,323 lb (12,394 kg) | | Length (Less Forks) | 238.8 in. (6.06 m) | | Width | 102 in. (2.59 m) | | Height | 101.1 in. (2.56 m) | | Wheelbase | 119.5 in. (3.03 m) | | Outside Turning Radius | 164 in. (4.16 m) | | Ground Clearance | 18 in. (457 mm) | | Drive | 4 x 4 | | Engine | Cummins QSB4.5T | | HP and RPM | 110 hp @ 2,500 rpm | | Transmission | Powershift | | Axle - Front | High-Bias, Limited Slip | | Axle - Rear | Planetary | | Steering | All-Wheel | | Tires | 17.5 x 25 - 12 ply | | Maximum Travel Speed | 20 mph (32 kmph) | | Frame Tilt Left/Right Frame Leveling | ±10 Degrees |
Rated lift capacities shown are with machine equipped with carriage and pallet forks. The machine must be level on a firm surface with undamaged, properly inflated tires. Machine specifications and stability are based on rated lift capacities at specific boom angles and boom lengths. (If specifications are critical, the proposed application should be discussed with your dealer.)- DO NOT exceed rated lift capacity loads, as unstable and dangerous machine conditions will result.
- DO NOT tip the machine forward to determine the allowable load.
Use only JLG approved attachments with proper material handler model/attachment load capacity charts displayed in the operator’s cab. OSHA requires all rough terrain forklift operators be trained according to OSHA 29 CFR 1910.178 (1).
| 
