Husqvarna PP 518 Power Pack 967153602, Gas Powered Hydraulic
Safety Information
Husqvarna PP 518 Power Pack
Protective equipment
General
Do not use the machine unless you are able to call for help in
the event of an accident.
Personal protective equipment
You must use approved personal protective equipment whenever you use the machine. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your
dealer for help in choosing the right equipment.
WARNING! The use of products such as cutters, grinders, drills, that sand or form material can generate dust and vapors which may contain hazardous chemicals. Check the nature of the material you intend to process and use an appropriate breathing mask.
WARNING! Long-term exposure to noise can result in permanent hearing impairment. So always use approved hearing protection.
Listen out for warning signals or shouts when you are wearing hearing protection.
Always remove your hearing protection as soon as the engine stops.
WARNING! There is always a risk of crush injuries when working with products
containing moving parts. Wear protective gloves to avoid body injuries.
Always wear:
• Protective helmet
• Hearing protection
• Protective goggles or a visor
• Breathing mask
• Heavy-duty, firm grip gloves.
• Tight-fitting, heavy-duty and comfortable clothing that permits full freedom of movement.
• Boots with steel toe-caps and non-slip sole
Be careful as clothing, long hair, and jewelry can get caught in moving parts.
Other protective equipment
WARNING! Sparks may appear and start a fire when you work with the machine. Always keep fire fighting equipment handy.
• Fire fighting equipment
• Always have a first aid kit nearby.
General safety precautions
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
This section describes basic safety directions for using the machine. This information is never a substitute for professional skills and experience.
• Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
• Keep in mind that the operator is responsible for accidents or hazards occurring to other people or their property.
• All operators shall be trained in the use of the machine.
The owner is responsible for ensuring that the operators receive training.
• The machine must be kept clean. Signs and stickers must be fully legible
WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others.
Never allow children or other persons not trained in the use of the machine to use or service it. Never allow anyone else to use the machine without first ensuring that they have read and understood the contents of the operator’s manual.
Never use the machine if you are fatigued, while under the influence of alcohol or drugs, medication or anything that could affect your vision, alertness, coordination or judgement.
WARNING! Unauthorized modifications and/ or accessories may lead to serious injury or death to the user or others.
Do not modify this product or use it if it appears to have been modified by others.
Never use a machine that is faulty. Carry out the safety checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance.
Always use genuine accessories.
Always use common sense
It is not possible to cover every conceivable situation you can face. Always exercise care and use your common sense. If you get into a situation where you feel unsafe, stop and seek expert advice. Contact your dealer, service agent or an experienced user. Do not attempt any task that you feel unsure of!
Work safety
Work area safety
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Always check and mark out where gas pipes are routed.
Cutting close to gas pipes always entails danger. Make sure that sparks are not caused when cutting in view of the risk of explosion. Remain concentrated and focused o the task. Carelessness can result in serious personal
injury or death.
• Do not use the machine in environments where there is a risk of explosion.
• Make sure that no pipes or electrical wires are routed in the work piece or in the working area.
• Make sure that electrical cables within the working area are not live.
• Observe your surroundings to ensure that nothing can affect your control of the machine.
• Do not use the machine in bad weather, such as dense fog, heavy rain, strong wind, intense cold, etc. Working in bad weather is tiring and can lead to dangerous conditions, e.g. slippery surfaces.
• Do not use the machine in wet or humid surroundings, close to water, in the rain or snow.
• Never start to work with the machine before the working area is clear and you have a firm foothold.
WARNING! Do not wash the machine with water, as water can enter the electrical
system or the engine and cause damage to the machine or short circuit
Personal safety
• Never use the machine if you are fatigued, while under the influence of alcohol or drugs, medication or anything that could affect your vision, alertness, coordination or judgement.
• Prevent unintentional starting. Make sure the ignition switch is in the Stop position and the flow control is in position 0.
• Never leave the machine unsupervised with the motor running.
• Never work alone, always ensure there is another person close at hand. Apart from being able to receive help to assemble the machine, you can also get help if an accident should occur.
• People and animals can distract you causing you to lose control of the machine. For this reason, always remain concentrated and focused on the task.
Use and care
• The machine is intended for use in industrial applications by experienced operators.
• Switch off the engine before carrying out any checks or maintenance.
• Do not overload the machine. Overloading can damage the machine.
• Always switch off the machine before you move it.
• Observe care when lifting. You are handling heavy parts, which imply the risk of pinch injuries or other injuries.
• Do not expose the machine to temperatures exceeding 45°C or to direct sunlight.
• Check that all couplings, connections and cables are intact and free from dirt.
• Keep all parts in good working order and ensure that all fixtures are properly tightened.
Transport
The safest way to move the hydraulic unit from a trailer to a working area is to lift it using the lifting eye. Never attach lifting devices to any other part of the machine. The other components are not designed to withstand the full weight of the hydraulic unit.
IMPORTANT! Only use the lifting eye when lifting the hydraulic unit.
Make sure no one is standing under the hydraulic unit if it has to be moved by hand up into or off a trailer or up and down a slope
|