Click

Skid Steer Rental 1650 lbs. (Mustang 2054) SS15



Operating Information

Note: The following skid steer safety & operating information is intended as a basic guide only. Operators should thoroughly acquaint themselves with the "Owner/Operator's Manual" specific to the make and model they have rented. OSHA requires that an "Owner/Operator's Manual" be present in the cab of a rented skid steer. If the complete manual is not present in your rented skid steer, call your rental dealer immediately. BE SAFE! BE AWARE!


What should I check before starting the engine?

Check the following before starting the engine:

  • Fuel and oil,
  • Hydraulic fluid,
  • Cooling system fluid,
  • Operator cab, seat belt and seat bar,
  • Lift arm and cylinder pivot points, and tires.
  • Follow the manufacturer's recommendations about how often to lubricate all the "lube" points.


What should I do when using a loader?
  • Read, understand, and follow instructions in the manufacturer's operating manual and safety decals on the loader.
  • Know how to operate the equipment safely and be familiar with the location and function of all the controls.
  • Know how to load, tie-down, transport, and unload the loader safely.
  • Wear hearing and head protection.
  • Use the safety treads and grab handles to get on and off the loader.
  • Use seat bar and fasten seat belt.

  • Keep your feet on the pedals when operating the loader.
  • Use only approved attachments and buckets.
  • Keep other people away from work area.
  • Drive with caution and check behind you before backing up.
  • Carry bucket or attachments as low as possible.
  • Load, unload, and turn on level ground.
  • Go straight up and down slopes with the heavy end of the loader pointed uphill.
  • Turn off the engine before attempting any repairs or adjustments.
  • If the equipment is going to be left unattended for sometime, remove the ignition key.
  • Set the parking brakes on before getting off the seat.
  • Lower the bucket before dismounting from the loader.

    What should I avoid when operating a loader?
    • Do not use loader without an approved roll-over protection (ROP) and falling object protection (FOP) cab.
    • Do not exceed rated operating capacity.
    • Do not carry passengers.
    • Do not use the bucket lift people or use as a work platform.
    • Do not make sharp, fast turns or move bucket controls abruptly.
    • Do not travel or turn with lift arms up.
    • Do not leave loader with engine running or with lift arms up.
    • Do not travel across a slope: go straight up or down slopes with the "heavy" end of the loader pointed uphill.
    • Do not approach overhead wires.


    How should I go up and down a slope with a full bucket?

    Keep the heavy end up!



    How should I go up and down a slope with an empty bucket?

    Keep the heavy end up!



    What kind of loaders does this information apply to?

    This information applies to smaller, front-end loaders called skid steer loaders. "Smaller" is a relative term; compact is another name for smaller loaders. Different manufacturers may rate their loaders up to 40 - 80 horsepower (or about 30 - 40 kW) as compact loaders. Some manufacturers use the term "compact loader" to mean what is usually called a skid steer loader or skidsteer loader used in landscaping. More commonly, "compact loader" refers to an articulating wheel loader; i.e., a loader that has two sections connected by a flexible joint and that can be steered by "bending" at the joint. Although many of the main safety principles for skid steer loaders apply to articulating wheel loaders, there are additional safety practices that relate to the operation and maintenance of articulated vehicles that are not covered in this document.

  • We know your business success depends on reliable quality equipment and parts to continue being a leader in your industry. When you want Genuine Mustang original equipment parts, accessories and equipment you can always depend on Discount-Equipment.com to come through with the genuine o.e.m. products you need as quickly and inexpensive as possible. Our sales staff combined experience consists of over 90 years in the construction parts and equipment industry. We have over 1 million items online, if you are having trouble finding your item, we also have the resources to help you find what you need, our industry leading web site includes thousands of parts and service manuals available to look up your items. If you don't find what you are looking for please fill out our parts request form here.


     Mustang Manufacturing Company, Inc. MTL325 Track Loader Printer_Friendly_Specifications_(pdf_184K)
     Mustang Manufacturing Company, Inc. MTL325 Track Loader Printer_Friendly_Specifications_(pdf_184K)
     Mustang Manufacturing Company, Inc. MTL20 Track Loader Printer_Friendly_Specification_(pdf_206K)
     Mustang Manufacturing Company, Inc. MTL20 Track Loader Printer_Friendly_Specification_(pdf_206K)
     Mustang Manufacturing Company, Inc. MTL16 Track Loader Printer_Friendly_Specification_(pdf_208K)
     Mustang Manufacturing Company, Inc. MTL16 Track Loader Printer_Friendly_Specification_(pdf_208K)
     Mustang Manufacturing Company, Inc. 944 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 844 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 842 Telehandler Mustang_842_Specifications
     Mustang Manufacturing Company, Inc. 842 Telehandler Mustang_842_Specifications
     Mustang Manufacturing Company, Inc. 742 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_533k)
     Mustang Manufacturing Company, Inc. 642 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 634 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 634 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 519 Telehandler Mustang_519_Specifications
     Mustang Manufacturing Company, Inc. 519 Telehandler Mustang_519_Specifications
     Mustang Manufacturing Company, Inc. 2109 Skid Steer Printer_Friendly_Specification_(pdf_204K)
     Mustang Manufacturing Company, Inc. 2109 Skid Steer Printer_Friendly_Specification_(pdf_204K)
     Mustang Manufacturing Company, Inc. 2100RT Brochure & Specs
     Mustang Manufacturing Company, Inc. 2100RT Brochure & Specs
     Mustang Manufacturing Company, Inc. 2099 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2099 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2086 Skid Steer Printer_Friendly_Specifications_(pdf_157K)
     Mustang Manufacturing Company, Inc. 2086 Skid Steer Printer_Friendly_Specifications_(pdf_157K)
     Mustang Manufacturing Company, Inc. 2076 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2076 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2066 Skid Steer Printer_Friendly_Specifications_(pdf_(186K)
     Mustang Manufacturing Company, Inc. 2066 Skid Steer Printer_Friendly_Specifications_(pdf_(186K)
     Mustang Manufacturing Company, Inc. 2054 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2054 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2044 Skid Steer Printer_Friendly_Specifications_(pdf_187K)
     Mustang Manufacturing Company, Inc. 2044 Skid Steer Printer_Friendly_Specifications_(pdf_187K)
     Mustang Manufacturing Company, Inc. 2041 Skid Steer Mustang 2026 & 2041 Skid Steer Product Brochure
     Mustang Manufacturing Company, Inc. 2041 Skid Steer Mustang 2026 & 2041 Skid Steer Product Brochure
     Mustang Manufacturing Company, Inc. 2041 Skid Steer Mustang 2026 & 2041 Skid Steer Product Brochure
     Mustang Manufacturing Company, Inc. 2032 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2032 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2026 Skid Steer Mustang_2026_Safety_&_Operation_Manual
     Mustang Manufacturing Company, Inc. 2026 Skid Steer Mustang_2026_Safety_&_Operation_Manual
     Mustang Manufacturing Company, Inc. 2022 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2022 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 1750RT Brochure and Specs 1750RT & 2100RT
     Mustang Manufacturing Company, Inc. 1750RT Brochure and Specs 1750RT & 2100RT
     Mustang Manufacturing Company, Inc. 1155 Telehandler Mustang_1155_Product_Specfications
     Mustang Manufacturing Company, Inc. 1155 Telehandler Mustang_1155_Product_Specfications



    Power Trowels

    Picture of Walk Behind Power trowel

    Shopping Cart

    Quote Queue

    Bil-Jax 0127-007-5 6' Length x 65" Height Unit

    Ride-On Power Trowel, Non-Overlapping 92" (Whiteman/Multiquip HHN34TVDTCSL4)

    22100 48300 Unloader Assy Airman PDS100S-6E1 Air Compressor

    13698-062 HITCH PIN Stow MS18 Mortar Mixer

    Bomag BVP 18/45 Forward Vibratory Plate Compactor Honda GX160

    45031-21 FRONT END CLAMP RETAINING NUT Miller Curber MC550 Curb Machine

    Marshalltown 1620MP13HPO Mortar/Plaster Mixer,1620MP, GX390 Honda, Hydraulic, Pintle Hitch, Outriggers - 27317

    JLG Bale Cradle, Round Bale (7,000 lb max. capacity) (1644)

    Marshalltown 800MP8HBO Mortar/Plaster Mixer, 800MP, GX240 Honda, 2" Ball Couple/Outriggers - 27302

    974800GT OIL DRAIN WITH VALVE KIT KUBOTA Terex AL4 Light Tower

    Skyjack Hostile Environment Package

    90318 Receptacle Panel 2 x 5-20R 3 x L6-30R 1 x 50A Generac Magnum MLG15-MLG20 Mobile Diesel Generator

    19009 TEE HANDLER Genuine OEM Small Line Parts

    22111 28200 Body Unloader Airman PDS100S-6E1 Air Compressor

    Stone Lift Jockey Assembly Column, 9' 6" (Stone 36824)

    Genie Super Tower Fork Extensions

    Norton Clipper HHDETOL Core Drill 2 Speed 115 Volts 1 Phase Hand Held 1180RPM Core Drill 70184600917

    JLG Continental TelemasterTM Solid Tires 315/95-28 (742)

    995755GT WASHER FLAT BONDED Terex AL4 Light Tower

    JLG Pallet Forks (2) 2.36 x 6 x 96 in (1644)

    Miscellaneous Smalline Part/Item (see note below) 99-Misc- Smalline-1

    Skyjack Light Duty Pipe Rack For SJ12/16 Vertical Lift

    19010 SAFETY CHAIN Genuine OEM Small Line Parts

    Skyjack 30 in x 60 in Platform

    Predator 820-0104 Electrical Cord 50' - 6/3, 250 Volt 1 Phase w/ 50 Amp Female & Male Twist Lock

    967882901 HUSQVARNA *(A)AT39 Vib.- (4812050806) GENUINE CONCRETE VIBRATORS

    Multiquip 13883-501 Shaft Coupler For 382V Shaft Extension NLA

    Weiler Spray bar with manual valve control for TT250 or TT500 Tack Sprayer

    967875302 HUSQVARNA (A)ER505 Ext. Vib. 230/460V- (4812050954) GENUINE CONCRETE VIBRATORS

    HW0001-LOCK NUT 1/2-13 UNC Miller Curber MC550 Curb Machine

    230567GT MAGNET SPRING ELECTRIC BRAKE Terex AL5 Light Tower

    JLG Grapple Bucket 94 in. 1.7 cu yd (12,000 lb max. capacity (1644)

    Skyjack Side Spring Hinged Entry Gate

    JLG Sheet Material Handler (742)

    JLG Winch, Coupler Mounted (8,000 lb max. capacity( (1644)

    90319 Receptacle Panel 2 x 5-20R 3 x L6-20R 1 x 50A Generac Magnum MLG15-MLG20 Mobile Diesel Generator

    967872001 HUSQVARNA (A)AMG3200 Honda Gen.- (4812050876) GENUINE CONCRETE VIBRATORS

    Contec CTBMODUL350 Modul 350 14 in Shot Blaster - 23 HP 480 Volt - 3 phase Bartell

    967855803 HUSQVARNA SMART 40 230v-1-50/60Hz- (4812052150) GENUINE CONCRETE VIBRATORS

    IMER 1106003 Koine 4 Plastering Machine 220V 60 Hz. Mortar & Concrete Pumps

    JLG Foam-Filled Tires 400/75-28 (1043)

    JLG Non-marking Solid Tires 33 x 12 (G5-18A)

    Bucket, Side-Dump, 73", .65 yd. (Fits Terex SKL824 Wheel Loader)

    Pipe, 4" x 10' (Con Forms T4011A10D)

    Marshalltown 1220MP75E3B230 Mortar/Plaster Mixer, 1220MP, RAM, 7.5HP Electric 3 PH 230V, 2" Ball Coupler - 27355

    Marshalltown 1620MP13HB Mortar/Plaster Mixer, 1620MP, GX390 Honda, Hydraulic, 2" Ball Coupler - 27312

    Contec 872714503062US Bull Blade Only 14.5 x 3 x 0.062 in Bartell

    Larger Sizes and Custom Sizes are Available

    EDCO 24200 TMS-10 Electric Tile Saw, 10", 1 1/2 HP

    Marshalltown 1220MP75E3PO230 Mortar/Plaster Mixer, 1220MP, RAM, 7.5HP Electric 3 PH 230V, Pintle /Outriggers - 27356

    Genie GE Forks

    Marshalltown 1620MP5E1O Mortar/Plaster Mixer, 1620MP, RAM, 5HP Electric 1 PH, Outriggers - 27319


    Manufacturer/Brand


    Equipment Type




    Over 32 Years of Serving the Industry