Click

Skid Steer Rental 2600 lbs. (Mustang 2086) SS20



Safety Information

Note: The following skid steer safety & operating information is intended as a basic guide only. Operators should thoroughly acquaint themselves with the "Owner/Operator's Manual" specific to the make and model they have rented. OSHA requires that an "Owner/Operator's Manual" be present in the cab of a rented skid steer. If the complete manual is not present in your rented skid steer, call your rental dealer immediately. BE SAFE! BE AWARE!


What should I check before starting the engine?

Check the following before starting the engine:

  • Fuel and oil,
  • Hydraulic fluid,
  • Cooling system fluid,
  • Operator cab, seat belt and seat bar,
  • Lift arm and cylinder pivot points, and tires.
  • Follow the manufacturer's recommendations about how often to lubricate all the "lube" points.


What should I do when using a loader?
  • Read, understand, and follow instructions in the manufacturer's operating manual and safety decals on the loader.
  • Know how to operate the equipment safely and be familiar with the location and function of all the controls.
  • Know how to load, tie-down, transport, and unload the loader safely.
  • Wear hearing and head protection.
  • Use the safety treads and grab handles to get on and off the loader.
  • Use seat bar and fasten seat belt.

  • Keep your feet on the pedals when operating the loader.
  • Use only approved attachments and buckets.
  • Keep other people away from work area.
  • Drive with caution and check behind you before backing up.
  • Carry bucket or attachments as low as possible.
  • Load, unload, and turn on level ground.
  • Go straight up and down slopes with the heavy end of the loader pointed uphill.
  • Turn off the engine before attempting any repairs or adjustments.
  • If the equipment is going to be left unattended for sometime, remove the ignition key.
  • Set the parking brakes on before getting off the seat.
  • Lower the bucket before dismounting from the loader.

    What should I avoid when operating a loader?
    • Do not use loader without an approved roll-over protection (ROP) and falling object protection (FOP) cab.
    • Do not exceed rated operating capacity.
    • Do not carry passengers.
    • Do not use the bucket lift people or use as a work platform.
    • Do not make sharp, fast turns or move bucket controls abruptly.
    • Do not travel or turn with lift arms up.
    • Do not leave loader with engine running or with lift arms up.
    • Do not travel across a slope: go straight up or down slopes with the "heavy" end of the loader pointed uphill.
    • Do not approach overhead wires.


    How should I go up and down a slope with a full bucket?

    Keep the heavy end up!



    How should I go up and down a slope with an empty bucket?

    Keep the heavy end up!



    What kind of loaders does this information apply to?

    This information applies to smaller, front-end loaders called skid steer loaders. "Smaller" is a relative term; compact is another name for smaller loaders. Different manufacturers may rate their loaders up to 40 - 80 horsepower (or about 30 - 40 kW) as compact loaders. Some manufacturers use the term "compact loader" to mean what is usually called a skid steer loader or skidsteer loader used in landscaping. More commonly, "compact loader" refers to an articulating wheel loader; i.e., a loader that has two sections connected by a flexible joint and that can be steered by "bending" at the joint. Although many of the main safety principles for skid steer loaders apply to articulating wheel loaders, there are additional safety practices that relate to the operation and maintenance of articulated vehicles that are not covered in this document.

  • We know your business success depends on reliable quality equipment and parts to continue being a leader in your industry. When you want Genuine Mustang original equipment parts, accessories and equipment you can always depend on Discount-Equipment.com to come through with the genuine o.e.m. products you need as quickly and inexpensive as possible. Our sales staff combined experience consists of over 90 years in the construction parts and equipment industry. We have over 1 million items online, if you are having trouble finding your item, we also have the resources to help you find what you need, our industry leading web site includes thousands of parts and service manuals available to look up your items. If you don't find what you are looking for please fill out our parts request form here.


     Mustang Manufacturing Company, Inc. MTL325 Track Loader Printer_Friendly_Specifications_(pdf_184K)
     Mustang Manufacturing Company, Inc. MTL325 Track Loader Printer_Friendly_Specifications_(pdf_184K)
     Mustang Manufacturing Company, Inc. MTL20 Track Loader Printer_Friendly_Specification_(pdf_206K)
     Mustang Manufacturing Company, Inc. MTL20 Track Loader Printer_Friendly_Specification_(pdf_206K)
     Mustang Manufacturing Company, Inc. MTL16 Track Loader Printer_Friendly_Specification_(pdf_208K)
     Mustang Manufacturing Company, Inc. MTL16 Track Loader Printer_Friendly_Specification_(pdf_208K)
     Mustang Manufacturing Company, Inc. 944 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 844 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 842 Telehandler Mustang_842_Specifications
     Mustang Manufacturing Company, Inc. 842 Telehandler Mustang_842_Specifications
     Mustang Manufacturing Company, Inc. 742 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_533k)
     Mustang Manufacturing Company, Inc. 642 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 634 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 634 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 519 Telehandler Mustang_519_Specifications
     Mustang Manufacturing Company, Inc. 519 Telehandler Mustang_519_Specifications
     Mustang Manufacturing Company, Inc. 2109 Skid Steer Printer_Friendly_Specification_(pdf_204K)
     Mustang Manufacturing Company, Inc. 2109 Skid Steer Printer_Friendly_Specification_(pdf_204K)
     Mustang Manufacturing Company, Inc. 2100RT Brochure & Specs
     Mustang Manufacturing Company, Inc. 2100RT Brochure & Specs
     Mustang Manufacturing Company, Inc. 2099 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2099 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2086 Skid Steer Printer_Friendly_Specifications_(pdf_157K)
     Mustang Manufacturing Company, Inc. 2086 Skid Steer Printer_Friendly_Specifications_(pdf_157K)
     Mustang Manufacturing Company, Inc. 2076 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2076 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2066 Skid Steer Printer_Friendly_Specifications_(pdf_(186K)
     Mustang Manufacturing Company, Inc. 2066 Skid Steer Printer_Friendly_Specifications_(pdf_(186K)
     Mustang Manufacturing Company, Inc. 2054 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2054 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2044 Skid Steer Printer_Friendly_Specifications_(pdf_187K)
     Mustang Manufacturing Company, Inc. 2044 Skid Steer Printer_Friendly_Specifications_(pdf_187K)
     Mustang Manufacturing Company, Inc. 2041 Skid Steer Mustang 2026 & 2041 Skid Steer Product Brochure
     Mustang Manufacturing Company, Inc. 2041 Skid Steer Mustang 2026 & 2041 Skid Steer Product Brochure
     Mustang Manufacturing Company, Inc. 2041 Skid Steer Mustang 2026 & 2041 Skid Steer Product Brochure
     Mustang Manufacturing Company, Inc. 2032 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2032 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2026 Skid Steer Mustang_2026_Safety_&_Operation_Manual
     Mustang Manufacturing Company, Inc. 2026 Skid Steer Mustang_2026_Safety_&_Operation_Manual
     Mustang Manufacturing Company, Inc. 2022 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2022 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 1750RT Brochure and Specs 1750RT & 2100RT
     Mustang Manufacturing Company, Inc. 1750RT Brochure and Specs 1750RT & 2100RT
     Mustang Manufacturing Company, Inc. 1155 Telehandler Mustang_1155_Product_Specfications
     Mustang Manufacturing Company, Inc. 1155 Telehandler Mustang_1155_Product_Specfications



    Power Trowels

    Picture of Walk Behind Power trowel

    Shopping Cart

    Quote Queue

    Sewer Snake Rental Manual SGPE

    JLG Side-Tilt Carriage, 50 in (742)

    06500-010 CAP SCREW 5/16-18 x 1-1/4" Stow MS18 Mortar Mixer

    20102-K SOLENOID LINKAGE.. Genuine OEM Small Line Parts

    Contec CTBMODUL200EU Modul 200 8 in Shot Blaster Extension Unit Bartell

    IMER 1106101 Spin 15 220V Mortar & Concrete Pumps

    SL6DDP-HE DOUBLE DIAPHRAGM PUMP WITH HATZ ENGINE AND ELECTRIC START Genuine OEM Small Line Parts

    Marshalltown 800MP8HO Mortar/Plaster Mixer, 800MP, GX240 Honda, Stationary/Outriggers - 27305

    JLG Universal Skid Steer Coupler (Special Build-to-Order Only) (G5-18A)

    Marshalltown 1220MP75E3P230 Mortar/Plaster Mixer, 1220MP, RAM, 7.5HP Electric 3 PH 230V, Pintle Hitch - 27354

    Power Blanket MD0520G Multi-Duty, Heavy-Duty Gray Alloy Concrete Curing Blanket, 5'x20'

    07029-005 LOCK WASHER 5/16 MultiQuip Whiteman WM45E-WM45H Plaster Mortar Mixer

    Husqvarna Smart E 40 Concrete Vibrator 967855810, Pokers, 110V, 1PH, 50/60Hz, Electric

    JLG Tilt Steering (open cab) (Special Build-to-Order Only) (G5-18A)

    Stone Kit Option Foam Tire (Lift Jockey LJ00 Stone 23471)

    Marshalltown 1620MP75E3P460 Mortar/Plaster Mixer, 1620MP, RAM, 7.5HP Electric 3 PH 460V, Pintle Hitch - 27369

    15312 SPRING Genuine OEM Small Line Parts

    20100-N FUEL SHUTDOWN SOLENOID..3 WIRE ..**Electrical parts non-returnable Genuine OEM Small Line Parts

    Genie GR-26J Runabout Aerial Work Platform Electric Rear Wheel

    967872302 HUSQVARNA (A)AZ36 Mechanical Vib.- (4812050810) GENUINE CONCRETE VIBRATORS

    Stone Lift Jockey Assembly Column, 8' 6" (Stone 36880

    JLG 1255 Package 4 Forklift Telehandler 55 ft Lift Height W /Enclosed Cab

    Skyjack Lifting Lugs

    JLG Battery Disconnect Switch (G5-18A)

    IMER 1106055 Step-Up 120 F Mixer/Pump 220V 60Hz 3 phase Mortar & Concrete Pumps

    967883001 HUSQVARNA (A)AT49 Vib.- (4812050807) GENUINE CONCRETE VIBRATORS

    826915GT CONTROL BOX TO COIL CORD KIT Terex AL4 Light Tower

    02280 08080 Socket bolt Airman PDS100S-6E1 Air Compressor

    07030-012 FLATWASHER 3/4 MultiQuip Whiteman WM45E-WM45H Plaster Mortar Mixer

    Folding ROPS, Roll Over Protection System, Basic 700

    JLG FT Vertical LiftPod Combo Pack Personal Portable Lift (P/N 1001211641)

    15017 FUEL FITTING Genuine OEM Small Line Parts

    07029-006 LOCKWASHER 3/8 MultiQuip Whiteman WM45E-WM45H Plaster Mortar Mixer

    967879301 HUSQVARNA (A)AX48E Elec. Vib. 42V- (4812050841) GENUINE CONCRETE VIBRATORS

    Grapple, Tine/Root 78" Heavy-Duty (Loflin R-78)

    Multiquip TRLRMP Trailer Multipurpose No Fuel Tank

    103138 Fuse, Velocity 6 GAL Genuine OEM Skyjack Parts **NO LONGER AVAILABLE - PART DISCONTINUED**

    Marshalltown 1620MP5E1P Mortar/Plaster Mixer, 1620MP, RAM, 5HP Electric 1 PH, Pintle Hitch - 27307

    Chicago Pneumatic T022292 CP0004RV Tamper

    Ride-On Power Trowel, Non-Overlapping 118" Hydrostatic (Whiteman/Multiquip STX55Y6) NLA

    Marshalltown 1620MP75E3BO230 Mortar/Plastic Mixer, 1620MP, RAM, 7.5HP Electric 3 PH 230V, 2" Ball/Outriggers - 27362

    JLG Pneumatic Agriculture Tires 10.5 x 18

    Bartell SA1010ST Saw Stand For 710 And 101 Series Tile Saws

    Ride-On Power Trowel, Non-Overlapping 92" Hydrostatic (Whiteman/Multiquip HTX44Y4) NLA

    Contac CT 320 13" Planer and Scarifier - 23HP 480 volt - 3 Phase CTPCT320

    Marshalltown 1620MP75E3O230 Mortar/Plaster Mixer, 1620MP, RAM, 7.5HP Electric 3 PH 230V, Outriggers - 27363


    Manufacturer/Brand


    Equipment Type




    Over 32 Years of Serving the Industry