Click

Multiquip / Mikasa MVC88VTH Compactor, Forward Plate, 20," 3,372 lb., Honda GX-160 Engine, w/o Water Tank



Safety Information

Multiquip / Mikasa MVC88VTH Compactor

SAFETY INFORMATION

GENERAL SAFETY

CAUTION

NEVER operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices required by the job or city and state regulations.

NEVER operate this equipment when not feeling well due to fatigue, illness or when
under medication.

NEVER operate this equipment under the influence of drugs or alcohol.

ALWAYS check the equipment for loosened threads or bolts before starting.

DO NOT use the equipment for any purpose other than its intended purposes or applications.

ALWAYS clear the work area of any debris, tools, etc. that would constitute a hazard while the equipment is in operation.

NOTICE

This equipment should only be operated by trained and qualified personnel 18 years of age and older.

Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.

Manufacturer does not assume responsibility for any accident due to equipment modifications. Unauthorized equipment modification will void all warranties.

NEVER use accessories or attachments that are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

ALWAYS know the location of the nearest fire extinguisher.

ALWAYS know the location of the nearest first aid kit.

ALWAYS know the location of the nearest phone or keep a phone on the job site. Also, know the phone numbers of the nearest ambulance, doctor and fi re department.
This information will be invaluable in the case of an emergency.

COMPACTOR SAFETY

DANGER

NEVER operate the equipment in an explosive atmosphere or near combustible materials. An explosion or fi re could result causing severe bodily harm or even death.

WARNING

NEVER disconnect any emergency or safety devices.
These devices are intended for operator safety.
Disconnection of these devices can cause severe injury, bodily harm or even death. Disconnection of any of these devices will void all warranties.

CAUTION

NEVER lubricate components or attempt service on a running machine.

NOTICE

ALWAYS keep the machine in proper running condition.

Fix damage to machine and replace any broken parts immediately.

ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children and unauthorized personnel.

ENGINE SAFETY

DANGER

The engine fuel exhaust gases contain poisonous carbon monoxide. This gas is colorless and odorless, and can cause death if inhaled.

The engine of this equipment requires an adequate free flow of cooling air. NEVER operate this equipment in any enclosed or narrow area where free flow of the
air is restricted. If the air flow is restricted it will cause injury to people and property and serious damage to the equipment or engine.

WARNING

DO NOT place hands or fingers inside engine compartment when engine is running.

NEVER operate the engine with heat shields or guards removed.

Keep fingers, hands hair and clothing away from all moving parts to prevent injury.

CAUTION

NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to
cool before servicing equipment.

NOTICE

NEVER run engine without an air filter or with a dirty air filter. Severe engine damage may occur. Service air filter frequently to prevent engine malfunction.

NEVER tamper with the factory settings of the engine or engine governor. Damage
to the engine or equipment can result if operating in speed ranges above the
maximum allowable.

NEVER tip the engine to extreme angles during lifting as it may cause oil to gravitate into the cylinder head, making the engine start difficult.

FUEL SAFETY

DANGER

DO NOT add fuel to equipment if it is placed inside truck bed with plastic liner. Possibility exists of explosion or fire due to static electricity.

DO NOT start the engine near spilled fuel or combustible fluids. Diesel fuel is extremely flammable and its vapors can cause an explosion if ignited.

ALWAYS refuel in a well-ventilated area, away from sparks and open flames.

ALWAYS use extreme caution when working with flammable liquids.

DO NOT fill the fuel tank while the engine is running or hot.

DO NOT overfill tank, since spilled fuel could ignite if it comes into contact with hot engine parts or sparks from the ignition system.

Store fuel in appropriate containers, in well-ventilated areas and away from sparks and flames.

NEVER use fuel as a cleaning agent.

DO NOT smoke around or near the equipment. Fire or explosion could result
from fuel vapors or if fuel is spilled on a hot engine.

TRANSPORTING SAFETY

CAUTION

NEVER allow any person or animal to stand underneath the equipment while lifting
.
NOTICE

Before lifting, make sure that the equipment parts (hook and vibration insulator) are not damaged and screws are not loose or missing.

Always make sure crane or lifting device has been properly secured to the lifting bail (hook) of the equipment.

ALWAYS shutdown engine before transporting.

NEVER lift the equipment while the engine is running.

Tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling.

Use adequate lifting cable (wire or rope) of sufficient strength.

Use one point suspension hook and lift straight upwards.

DO NOT lift machine to unnecessary heights.

ALWAYS tie down equipment during transport by securing the equipment with rope.

ENVIRONMENTAL SAFETY/DECOMMISSIONING

NOTICE

Decommissioning is a controlled process used to safely retire a piece of equipment that is no longer serviceable.
If the equipment poses an unacceptable and unrepairable safety risk due to wear or damage or is no longer cost
effective to maintain (beyond life-cycle reliability) and is to be decommissioned (demolition and dismantlement),be sure to follow rules below.

DO NOT pour waste or oil directly onto the ground, down a drain or into any water source.

Contact your country's Department of Public Works or recycling agency in your
area and arrange for proper disposal of any electrical components, waste or oil
associated with this equipment.

When the life cycle of this equipment is over, remove battery and bring to appropriate facility for lead reclamation. Use safety precautions when handling
batteries that contain sulfuric acid.

When the life cycle of this equipment is over, it is recommended that the trowel frame and all other metal parts be sent to a recycling center.

Metal recycling involves the collection of metal from discarded products and its transformation into raw materials to use in manufacturing a new product.

Recyclers and manufacturers alike promote the process of recycling metal. Using a metal recycling center promotes energy cost savings.

EMISSIONS INFORMATION

NOTICE

The gasoline engine used in this equipment has been designed to reduce harmful levels of carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxides (NOx)
contained in gasoline exhaust emissions.

This engine has been certified to meet US EPA Evaporative emissions requirements in the installed configuration.
Attempting to modify or make adjustments to the engine emission system by unauthorized personnel without proper training could damage the equipment or create an unsafe condition.

Additionally, modifying the fuel system may adversely affect evaporative emissions, resulting in fines or other penalties.

Emission Control Label

The emission control label is an integral part of the emission system and is strictly controlled by regulation(s).

The label must remain with the engine for its entire life.

If a replacement emission label is needed, please contact your authorized engine distributor.

BATTERY SAFETY (ELECTRIC START ONLY)

DANGER

DO NOT drop the battery. There is a possibility that the battery will explode.

DO NOT expose the battery to open flames, sparks, cigarettes, etc. The battery contains combustible gases and liquids. If these gases and liquids come into contact with a flame or spark, an explosion could occur.

WARNING

ALWAYS wear safety glasses when handling the battery to avoid eye irritation.
The battery contains acids that can cause injury to the eyes and skin.

Use well-insulated gloves when picking up the battery.

ALWAYS keep the battery charged. If the battery is not charged, combustible gas will build up.

DO NOT charge battery if frozen. Battery can explode.
When frozen, warm the battery to at least 61°F (16°C).

ALWAYS recharge the battery in a well-ventilated environment to avoid the risk of a dangerous concentration of combustible gases.

If the battery liquid (dilute sulfuric acid) comes into contact with clothing or skin, rinse skin or clothing immediately with plenty of water.

If the battery liquid (dilute sulfuric acid) comes into contact with eyes, rinse eyes immediately with plenty of water and contact the nearest doctor or hospital to
seek medical attention.

CAUTION

ALWAYS disconnect the NEGATIVE battery terminal before performing service on the equipment.

ALWAYS keep battery cables in good working condition.
Repair or replace all worn cables.


We know your business success depends on reliable quality equipment and parts to continue being a leader in your industry. When you want Genuine Multiquip / Mikasa original equipment parts, accessories and equipment you can always depend on Discount-Equipment.com to come through with the genuine o.e.m. products you need as quickly and inexpensive as possible. Our sales staff combined experience consists of over 90 years in the construction parts and equipment industry. We have over 1 million items online, if you are having trouble finding your item, we also have the resources to help you find what you need, our industry leading web site includes thousands of parts and service manuals available to look up your items. If you don't find what you are looking for please fill out our parts request form here.





Power Trowels

Picture of Walk Behind Power trowel

Shopping Cart

Quote Queue

37111 22302 Pipe Airman PDS185S-6C2 Air Compressor

542773556 Husqvarna 24 235 LYBHP W1107 NWN HI PERF WALL SAW BLD WIDE Wallsaw Blades (805544677851)

Predator 836-0160404 T-Mag, 16 Grit (Grey), Single Round, Hard Bond

Predator 836-1500101 T-Mag, 150 Grit (Blue), Double Rectangle, X-Soft Bond

588048902 Husqvarna 63 220 1DP LYBHP W1107 NWN MAX PERF WALL SAW BLD NRW Wallsaw Blades (805544943222)

542759971 Husqvarna 30 250 LYBHP W1107S NWN SSW HI PERF WALL SAW BLD WIDE Wallsaw Blades (805544604574)

GX100RTKRWN Honda 100CC HONDA ENGINE Genuine OEM Honda

239119 Fan Shroud (6-112) Genuine OEM Winco Products

GX35NTS3 Honda 35CC HONDA ENGINE Genuine OEM Honda

Multiquip MP2H Masonry Saw, 20" Honda GX270 Gasoline Engine NLA

Predator 836-1500202 T-Mag, 150 Grit (Blue), Single Rectangle, Soft Bond

Predator 836-0800101 T-Mag, 70/80 Grit (Yellow), Double Rectangle, X-Soft Bond

542761202 Husqvarna 16 140 1DP HH610 HI PERF HAND SAW BLD WET Wallsaw Blades (098526538282)

GX120UT2HX2-BK Honda 120CC HONDA ENGINE Genuine OEM Honda

542766932 Husqvarna 26 250 1-3/8 PTBHP W1107 NWN HI PERF WALL SAW BLD WIDE Wallsaw Blades (805544792790)

Bil-Jax 0068-123 C-Lock Stud

GX100UKRM Honda 100CC HONDA ENGINE Genuine OEM Honda

SPE 836-90-7007 MS330 replacement steel scraper blade Bartell

GX200UT2QX2-BK Honda 200CC HONDA ENGINE Genuine OEM Honda

250249 Remote Mimic Display Panel for Winco 40/40 Tier 4 (358456-11) Genuine OEM Winco Products

227652GT ELECTRIC BOX 8KW 4L 4POLE T/L Terex AL5 Light Tower

GX35NTSTR4 Honda 35CC HONDA ENGINE Genuine OEM Honda

GX270UT2QZAVRA2 Honda 270CC HONDA ENGINE Genuine OEM Honda

GX120UT3QJG2-BK Honda 120CC HONDA ENGINE Genuine OEM Honda

GX160UT2TXC9 Honda 160CC HONDA ENGINE Genuine OEM Honda

10354544 (9104404K) BRUSH ALL WIRE 6 FOOT Laymor Sweepmaster 6HC 8HC Sweeper

227318GT ELECTRIC BOX 20KW 6-LIGHT Terex AL5 Light Tower

529937718 Husqvarna 32 235 1-3/8 PTBHP W1515-NNN DIAMOND TOOL WALLSAW BLADES (805544566070) Genuine OEM Husqvarna

585766401 Husqvarna 36 250 1.375 PTBHP W1410-NNN MAX PERF WALL SAW BLD NRW Wallsaw Blades (805544858670)

Contec CTDR2D27 R2D2-7 Dust Collector - 480 volt - 3 phase Bartell

542761117 Husqvarna 36 220 1DP LYBHP W601-NNN MAX PERF WALL SAW BLD NRW Wallsaw Blades (098526482554)

542761208 Husqvarna 24 140 1DP LYBHP HH610 HI PERF HAND SAW BLD WET Wallsaw Blades (098526860635)

249643 Air Filter (11-100) Genuine OEM Winco Products

Bil-Jax 0036-040 Putlog Spreader-5' Frame Sp. (Tube 6)


Manufacturer/Brand


Equipment Type




Over 32 Years of Serving the Industry