Click

Skid Steer, 2600 lbs. (Mustang 2086)



Safety Information

Note: The following skid steer safety & operating information is intended as a basic guide only. Operators should thoroughly acquaint themselves with the "Owner/Operator's Manual" specific to the make and model they have rented. OSHA requires that an "Owner/Operator's Manual" be present in the cab of a rented skid steer. If the complete manual is not present in your rented skid steer, call your rental dealer immediately. BE SAFE! BE AWARE!


What should I check before starting the engine?

Check the following before starting the engine:

  • Fuel and oil,
  • Hydraulic fluid,
  • Cooling system fluid,
  • Operator cab, seat belt and seat bar,
  • Lift arm and cylinder pivot points, and tires.
  • Follow the manufacturer's recommendations about how often to lubricate all the "lube" points.


What should I do when using a loader?
  • Read, understand, and follow instructions in the manufacturer's operating manual and safety decals on the loader.
  • Know how to operate the equipment safely and be familiar with the location and function of all the controls.
  • Know how to load, tie-down, transport, and unload the loader safely.
  • Wear hearing and head protection.
  • Use the safety treads and grab handles to get on and off the loader.
  • Use seat bar and fasten seat belt.

  • Keep your feet on the pedals when operating the loader.
  • Use only approved attachments and buckets.
  • Keep other people away from work area.
  • Drive with caution and check behind you before backing up.
  • Carry bucket or attachments as low as possible.
  • Load, unload, and turn on level ground.
  • Go straight up and down slopes with the heavy end of the loader pointed uphill.
  • Turn off the engine before attempting any repairs or adjustments.
  • If the equipment is going to be left unattended for sometime, remove the ignition key.
  • Set the parking brakes on before getting off the seat.
  • Lower the bucket before dismounting from the loader.

    What should I avoid when operating a loader?
    • Do not use loader without an approved roll-over protection (ROP) and falling object protection (FOP) cab.
    • Do not exceed rated operating capacity.
    • Do not carry passengers.
    • Do not use the bucket lift people or use as a work platform.
    • Do not make sharp, fast turns or move bucket controls abruptly.
    • Do not travel or turn with lift arms up.
    • Do not leave loader with engine running or with lift arms up.
    • Do not travel across a slope: go straight up or down slopes with the "heavy" end of the loader pointed uphill.
    • Do not approach overhead wires.


    How should I go up and down a slope with a full bucket?

    Keep the heavy end up!



    How should I go up and down a slope with an empty bucket?

    Keep the heavy end up!



    What kind of loaders does this information apply to?

    This information applies to smaller, front-end loaders called skid steer loaders. "Smaller" is a relative term; compact is another name for smaller loaders. Different manufacturers may rate their loaders up to 40 - 80 horsepower (or about 30 - 40 kW) as compact loaders. Some manufacturers use the term "compact loader" to mean what is usually called a skid steer loader or skidsteer loader used in landscaping. More commonly, "compact loader" refers to an articulating wheel loader; i.e., a loader that has two sections connected by a flexible joint and that can be steered by "bending" at the joint. Although many of the main safety principles for skid steer loaders apply to articulating wheel loaders, there are additional safety practices that relate to the operation and maintenance of articulated vehicles that are not covered in this document.

  • We know your business success depends on reliable quality equipment and parts to continue being a leader in your industry. When you want Genuine Mustang original equipment parts, accessories and equipment you can always depend on Discount-Equipment.com to come through with the genuine o.e.m. products you need as quickly and inexpensive as possible. Our sales staff combined experience consists of over 90 years in the construction parts and equipment industry. We have over 1 million items online, if you are having trouble finding your item, we also have the resources to help you find what you need, our industry leading web site includes thousands of parts and service manuals available to look up your items. If you don't find what you are looking for please fill out our parts request form here.


     Mustang Manufacturing Company, Inc. MTL325 Track Loader Printer_Friendly_Specifications_(pdf_184K)
     Mustang Manufacturing Company, Inc. MTL325 Track Loader Printer_Friendly_Specifications_(pdf_184K)
     Mustang Manufacturing Company, Inc. MTL20 Track Loader Printer_Friendly_Specification_(pdf_206K)
     Mustang Manufacturing Company, Inc. MTL20 Track Loader Printer_Friendly_Specification_(pdf_206K)
     Mustang Manufacturing Company, Inc. MTL16 Track Loader Printer_Friendly_Specification_(pdf_208K)
     Mustang Manufacturing Company, Inc. MTL16 Track Loader Printer_Friendly_Specification_(pdf_208K)
     Mustang Manufacturing Company, Inc. 944 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 844 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 842 Telehandler Mustang_842_Specifications
     Mustang Manufacturing Company, Inc. 842 Telehandler Mustang_842_Specifications
     Mustang Manufacturing Company, Inc. 742 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_533k)
     Mustang Manufacturing Company, Inc. 642 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 634 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 634 Telehandler Print_Friendly_Specs_&_Brochure_(pdf_463k)
     Mustang Manufacturing Company, Inc. 519 Telehandler Mustang_519_Specifications
     Mustang Manufacturing Company, Inc. 519 Telehandler Mustang_519_Specifications
     Mustang Manufacturing Company, Inc. 2109 Skid Steer Printer_Friendly_Specification_(pdf_204K)
     Mustang Manufacturing Company, Inc. 2109 Skid Steer Printer_Friendly_Specification_(pdf_204K)
     Mustang Manufacturing Company, Inc. 2100RT Brochure & Specs
     Mustang Manufacturing Company, Inc. 2100RT Brochure & Specs
     Mustang Manufacturing Company, Inc. 2099 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2099 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2086 Skid Steer Printer_Friendly_Specifications_(pdf_157K)
     Mustang Manufacturing Company, Inc. 2086 Skid Steer Printer_Friendly_Specifications_(pdf_157K)
     Mustang Manufacturing Company, Inc. 2076 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2076 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2066 Skid Steer Printer_Friendly_Specifications_(pdf_(186K)
     Mustang Manufacturing Company, Inc. 2066 Skid Steer Printer_Friendly_Specifications_(pdf_(186K)
     Mustang Manufacturing Company, Inc. 2054 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2054 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2044 Skid Steer Printer_Friendly_Specifications_(pdf_187K)
     Mustang Manufacturing Company, Inc. 2044 Skid Steer Printer_Friendly_Specifications_(pdf_187K)
     Mustang Manufacturing Company, Inc. 2041 Skid Steer Mustang 2026 & 2041 Skid Steer Product Brochure
     Mustang Manufacturing Company, Inc. 2041 Skid Steer Mustang 2026 & 2041 Skid Steer Product Brochure
     Mustang Manufacturing Company, Inc. 2041 Skid Steer Mustang 2026 & 2041 Skid Steer Product Brochure
     Mustang Manufacturing Company, Inc. 2032 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2032 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2026 Skid Steer Mustang_2026_Safety_&_Operation_Manual
     Mustang Manufacturing Company, Inc. 2026 Skid Steer Mustang_2026_Safety_&_Operation_Manual
     Mustang Manufacturing Company, Inc. 2022 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 2022 Skid Steer Product_Brochure
     Mustang Manufacturing Company, Inc. 1750RT Brochure and Specs 1750RT & 2100RT
     Mustang Manufacturing Company, Inc. 1750RT Brochure and Specs 1750RT & 2100RT
     Mustang Manufacturing Company, Inc. 1155 Telehandler Mustang_1155_Product_Specfications
     Mustang Manufacturing Company, Inc. 1155 Telehandler Mustang_1155_Product_Specfications



    Power Trowels

    Picture of Walk Behind Power trowel

    Shopping Cart

    Quote Queue

    237493 WL10000VE Gas Generator (24010-000) Genuine OEM Winco Products

    Liftgate Service Freight Option on your Delivery Additional Cost (103-FRGHTIN)

    Air Compressor, 5hp, 80 gal, E-50 pump

    542755213 Husqvarna 24 187 LYBHP W1107 NWN HI PERF WALL SAW BLD WIDE Wallsaw Blades (805544556781)

    591377602 Husqvarna 54 220 1-3/8 PTBHP W1107 NWN DIAMOND TOOL WALLSAW BLADES (805544440042) Genuine OEM Husqvarna

    584905104 Husqvarna 26 235 1DP LYBHP W1410-NNN MAX PERF WALL SAW BLD NRW Wallsaw Blades (805544840958)

    529937733 Husqvarna 42 235 1DP LYBHP W1515-NWN DIAMOND TOOL WALLSAW BLADES (805544566728) Genuine OEM Husqvarna

    Little Beaver 8 HP Mechanical Auger - Honda Engine(MDL-8H)

    542776001 Husqvarna 24 187 LYBHP W1120 NWN HI PERF WALL SAW BLD WIDE Wallsaw Blades (805544377591)

    JLG H340AJ Package 4 Hybrid Articulating Boom Lift 4WD W/ Kubota Z482 11.1 HP/ 8x12V, AGM Batteries

    237122 Fan Shroud (MISC999) Genuine OEM Winco Products

    Power Blanket EH0409NH Extra Hot Standard-Duty Black Alloy Heating/Thawing Blanket 4'x9'

    585085502 Husqvarna 54 220 1-3/8 PTBHP W1410 NWN MAX PERF WALL SAW BLD NRW Wallsaw Blades (805544890038)

    AlturnaMATS AMCP3 3' x 8' White Alturnamat Mat-Pak - Smooth One Side

    Predator 836-0400102 T-Mag, 30/40 Grit (Black), Double Rectangle, Soft Bond

    Predator 836-0400201 T-Mag, 30/40 Grit (Black), Single Rectangle, X-Soft Bond

    Predator 836-1500402 T-Mag, 150 Grit (Blue), Single Round, Soft Bond

    Bil-Jax 0068-095 U-Bolt Only - Putlog Angle Hanger 0037-16

    Husqvarna DS 900 Core Drill Stand 967301602, Anchor Base

    SPE 836-SPE9ES-2A 9" Self Propelled Shot Blaster 220 V Single Phase 20 Amp Bartell

    SPE 836-9032000 BEF320 cage w/ shafts Bartell

    Leica (777068) Leica LINO P5 5-Point laser

    Kerosene Heater, 125,000 BTU (Mi-T-M MH-0125-0M10)

    Bartell 20476 Trowel Combo Blades, Set of 4, 8 1/8"x14"x.092 Max

    Husqvarna WS 220 Wall Saw 967208701, 20", SYSTEM W/O PP220, Electric Motor

    Lull 644E 42 Forklift Telescopic 42' 6,000lbs.


    Manufacturer/Brand


    Equipment Type




    Over 32 Years of Serving the Industry