Generac Magnum MTP4SZ 4" Wet Prime Diesel Trash Pump

POWERFUL, DURABLE & EASY TO USE: High performance priming system Handles solids up to 3 in. (76.2 mm) in diameter Designed for easy service and maintenance LOFA CP750 digital controller with large, back-lit LCD display Built-in containment for all engine fluids Four-corner leveling for stability and complete fuel usage Pad-lockable battery box

MTP4SZ - WET PRIME MOBILE TRASH PUMP ENGINE: Deutz TD 2.9 L4 – water-cooled, naturally aspirated diesel engine - 49 hp @ 2600 rpm - 4 cylinder - 2.9 Liter displacement - DOC only for exhaust after treatment - EPA Final Tier 4 approved Steel, single wall fuel tank 113 gal. (428 L) capacity / 100 gal. (379 L) usable Fuel consumption at prime: 100% - 2.30 gph (8.71 Lph) Cooling system capable of operating at 120ºF (49ºC) ambient Disposable air filter – paper element 950 CCA wet cell battery 95 Amp alternator Low coolant warning/shutdown PUMP: Cornell 4STX Self Prime Centrifugal Pump 4.00” NPTF – suction & discharge connection Ductile Iron ASTM A536, 65-45-12 volute casing Ductile Iron ASTM A536, 100-70-03 impeller Self-cleaning wear plate – mild steel Impeller is a 2 vane, semi-open design Single mechanical seal, John Crane Type 2, with tungsten carbide vs silicon carbide faces Replaceable wear plate Pump shaft – 17-4 PH Stainless steel PUMP PERFORMANCE: Pump maximum output – 900 gpm (3,407 Lpm) Lift suction – 28 ft. (8.5 m) Maximum diameter of solids – 3.00” (76.2 mm) Impeller diameter: 9.75 inches (cm) Maximum Efficiency (BEP Percent) – 55% BEP Flow – 682 gpm (Lpm) @ 107ft. TDH Total dynamic head – 150 ft (m) Duty Points: o 500 gpm @ 52-ft TDH @ 1500 RPM, 55% efficiency, NPSHR 9.02 ft 753 gpm @ 98.6-ft TDH @ 2100 RPM, 55% efficiency, NPSHR 17.2 ft SYSTEM CONTROLS: White LED lighting control panel lighting Standard controller – LOFA CP750 Large, backlit 4.3 in. (109 mm) LCD display Displays engine temp, engine speed, fuel level, engine hrs., coolant temp, and oil pressure Advanced automatic start/stop control for use with two-switch inputs and 4-20mA transducer Configurable high and low set points control start/stop operation Alarm output to signal start warning or shutdown conditions Heavy-duty IP64 water-resistant key switch with booted key RS485 serial interface for auxiliary equipment Electronic e-stop with red LED engagement indicator light TRAILER: Flip-tongue design Bolt-on, replaceable front tongue mounting plate DOT approved LED tail, side, brake, and directional lights (4) transportation tie downs capable of handling 3 in. (76.2 mm) trailer straps Safety chains with spring loaded safety hooks 2 in. (50.8 mm) adjustable ball hitch 6000 lb. (2722 kg) torsion axle with surge brakes 2000 lb. (907 kg) tongue jack with footplate (2) 2000 lb. (907 kg) top wind jacks, with option to add up to (4) ST225/75R15 tubeless tires – 8 ply UV & fade resistant, high temperature cured, black polyester power paint Central lifting point Document holder with operating manual including the AC/DC wiring diagrams WEIGHT & DIMENSIONS: Trailer Mounted: - Dry weight: 3,714 lbs. (1,685 kg) - Operating weight: 4,528 lbs. (2,054 kg) - Dimensions: 150.12 x 75.00 x 73.88 in. (3.81 x 1.91 x 1.88 m) Skid Mount: - Dry weight: 3,094 lbs. (1,403 kg) - Operating weight: 4,528 lbs. (2,054 kg) - Dimensions: 91.16 x 66.60 x 61.50 in. (2.32 x 1.69 x 1.56 m) WARRANTY: 1 Year, Unlimited Hours / 2 Years, 2000 Hours; See warranty policy for complete details