Generac Magnum MTP4DZV 4" Venturi Dry Prime Trash Pump

POWERFUL & DURABLE & EASY TO USE: High efficiency pump end with best-in-class, lowest suction/discharge height Durable steel roll cage protects pump radiator and other components from damage Pad-lockable battery box Designed for easy service and maintenance Automatic start/stop control for use with two-switch inputs Easy conversion to optional sound attenuated flip hood cabinet (dry prime models only)

MTP4DZV - VENTURI DRY PRIME MOBILE TRASH PUMP with Enclosure Option ENGINE: Deutz TD 2.9 L4 – water-cooled, naturally aspirated diesel engine - 49 hp @ 2600 rpm - 4 cylinder - 2.9 Liter displacement - DOC only for exhaust after treatment - EPA Final Tier 4 approved - Steel, single wall fuel tank 113 gal. (428 L) capacity / 100 gal. (379 L) usable Fuel consumption at prime: 100% - 2.93 gph (11.1 Lph) Cooling system capable of operating at 120ºF (49ºC) ambient Disposable air filter – paper element 950 CCA wet cell battery 95 Amp alternator Low coolant warning/shutdown PUMP: Cornell 4NNTL, Venturi Dry Prime Centrifugal Pump Bendix compressor flow up to 13.2 CFM 4 in. NPTF – suction & discharge connection Cast Iron ASTM A48 Class 30 pump casing Cast Iron ASTM A48, Class 30 impeller 2 vane, enclosed impeller Impeller design incorporated with deflector vanes and pump out vanes Single mechanical seal, John Crane Type 1 & 2, with tungsten carbide vs silicon carbide faces Replaceable wear ring Run-dry system for continuous operations without need for external flush water or venting Pump shaft - 1144 stress-proof steel PUMP PERFORMANCE: Pump output – 1450 gpm (5489 Lpm) Lift suction – 28 ft. (8.5 m) Maximum diameter of solids – 3 in. (76.2 mm) Impeller diameter: 8.25 in. (20.9 cm) Maximum efficiency (BEP Percent) – 80% BEP Flow – 870 gpm (3,293 Lpm) @ 107ft. TDH Total dynamic head – 165 ft. (50.29 m) Intake/Discharge height – 29 in. (73.7 cm) Duty Points: - 700 gpm (2650 Lpm) @ 60 ft. (18.3 m) TDH @ 1800 RPM, 78% efficiency, NPSHR 10 ft. (3.05 m) - 1,000 gpm (3,785 Lpm) @ 104 ft. (24.4 m) TDH @ 2500 RPM, 79% efficiency, NPSHR 11 ft. (3.35 m) SYSTEM CONTROLS: White LED lighting control panel lighting Standard controller – LOFA CP750 - Large, backlit 4.3 in. (109 mm) LCD display - Displays engine temp, engine speed, fuel level, engine hrs., coolant temp, and oil pressure Advanced automatic start/stop control for use with two-switch inputs and 4-20mA transducer Configurable high and low set points control start/stop operation Alarm output to signal start warning or shutdown conditions Heavy-duty IP64 water-resistant key switch with booted key RS485 serial interface for auxiliary equipment Electronic e-stop with red LED engagement indicator light TRAILER: Flip-tongue design Bolt-on, replaceable front tongue mounting plate DOT approved LED tail, side, brake, and directional lights (4) transportation tie downs capable of handling 3 in. (76.2 mm) trailer straps Safety chains with spring loaded safety hooks 2 in. (50.8 mm) adjustable ball hitch 6000 lb. (2722 kg) torsion axle with surge brakes 2000 lb. (907 kg) tongue jack with footplate (2) 2000 lb. (907 kg) top wind jacks, with option to add up to (4) ST225/75R15 tubeless tires – 8 ply UV & fade resistant, high temperature cured, black polyester power paint Central lifting point Document holder with operating manual including the AC/DC wiring diagrams WEIGHT & DIMENSIONS: Trailer Mounted o Dry weight: 3,554 lbs. (1,612 kg) - Operating weight: 4,368 lbs. (1,981 kg) - Dimensions: 150.12 x 75.00 x 73.88 in. (3.81 x 1.91 x 1.88 m) Skid Mount o Dry weight: 2,735 lbs. (1,331 kg) - Operating weight: 3,748 lbs. (1,700 kg) - Dimensions: 91.16 x 66.60 x 61.50 in. (2.32 x 1.91x 1.88 m) ENCLOSURE OPTION: Aluminum, sound attenuated enclosure; insulated and baffled Field fitment of enclosure without need to modify trailer UV & fade resistant, high temperature cured, white polyester powder paint Stainless steel hinges on all doors Fully lockable enclosure including doors and fuel fill Rear cabinet opens to allow for full access to pump and bearing frame for ease of service or pump replacement without needing to remove any cabinet or panels (2) side access doors open 90 degrees for easy access to pump controller and engine service points with positive stay hinges Easy access from top of cabinet for radiator fill and inspection WEIGHT & DIMENSIONS with ENCLOSURE: Trailer Mounted o Dry weight: 3,804 lbs. (1,725 kg) - Operating weight: 4,618 lbs. (2,094 kg) - Dimensions: 150.12 x 75.00 x 73.88 in. (3.81 x 1.91 x 1.88 m) Skid Mount o Dry weight: 3,185 lbs. (1,445 kg) - Operating weight: 3,998 lbs. (1,813 kg) - Dimensions: 91.16 x 66.60 x 61.50 in. (2.32 x 1.91x 1.88 m)